Monitoring Energi Secara Real-Time pada Mesin Berbasis IoT

Irvando Anto verry Damanik, Suratmadji Suratmadji, Agus Juniawan K

Abstract


Energy monitoring is one method used to improve the efficiency of the use of an electrical equipment. A machine with a large capacity needs to be monitored to find out its availability so that there are no power losses, idle conditions and its performance can be maximized in accordance with the maximum capacity. In addition to the main parameters that are monitored (kWh), monitoring is also carried out on the frequency, current, voltage, power factor parameters. Methods of data collection were carried out by designing electronic and sensor systems, device installation, testing data readings, server setup, connectivity testing, hardware integration to web-service, measurement and analysis. The research data was obtained using the CT component which was communicated with the Controller using RS-485 and data was collected in a data base on the server as an embodiment of the Internet of Things (IoT). Observation data was processed using programming, and displayed on an online-based dashboard, so reading data was monitored online on the web-service and data was stored on the server as Big Data.

Monitoring energi merupakan salah satu metode yang digunakan untuk meningkatkan efisiensi penggunaan suatu perlatan listrik. Mesin dengan kapasitas besar perlu dimonitor untuk mengetahui availability nya sehingga tidak terjadi rugi-rugi daya, kondisi idle dan performa nya dapat maksimal sesuai dengan kapasitas optimum yang memungkinkan, sehingga selain parameter utama yang dimonitor (kWh), dilakukan juga monitoring pada parameter frekuensi, arus, faktor daya. Metode pengumpulan data dilakukan dengan perancangan sistem elektronik dan sensor, instalasi perangkat, uji coba pembacaan data, penyiapan server, uji konektivitas, integrasi  hardware ke web-service, pengukuran dan analisa. Data penelitian diperoleh dengan menggunakan komponen CT yang dikomunikasikan dengan controller menggunakan RS-485 dan data dikumpulkan pada data base di server sebagai perwujudan dari Internet of Things (IoT). Data yang diperoleh diolah dengan menggunakan pemrograman, dan ditampilkan pada dashboard berbasis online, sehingga data hasil pembacaan dimonitor secara online di web-service dan data tersimpan di server sebagai Big data.

Keywords


monitoring energi, IoT, big data

Full Text:

PDF

References


I. Dinata and W. Sunanda., “Implementasi Wireless Monitoring”., Nas. Tek. Elektro, no. 1, pp. 83–88, 2015.

Y. Sun and Z. Wang., “The Energy Consumption Monitoring Platform Design for Large-Scale Industry Users Based on the GPRS”., 2011 2nd Int. Conf. Mech. Autom. Control Eng. MACE 2011 - Proc., pp. 7827–7830, 2011.

A. Van Den Bossche, B. Meersman, and L. Vandevelde., “Fundamental Tarification of Electricity Keywords Single phase tarification”,. Power Qual., pp. 1–7, 2009.

M. Artiyasa, S. N. Hanifah, and A. Felani., “Analysis Deviation of Direct Measurement kWh Meter in PLN P2TL Rayon Sukaraja Kab. Sukabumi”., 3rd Int. Conf. Comput. Eng. Des. ICCED 2017, vol. 2018-March, pp. 1–6, 2018.

R. R. A. Siregar, N. Wardana, and Luqman, “Sistem Monitoring Kinerja Panel Listrik Tenaga Surya Menggunakan Arduino Uno,” JETri J. Ilm. Tek. Elektro, vol. 14, no. 2, pp. 81–100, 2017.

A. A. Ilham and A. A. S. Ramschie., “Sistem Monitoring dan Kendali Kerja Air Conditioning Berbasis Mikrokontroller ATmega 8535”., J. Ristek, vol. 2, no. 1, 2013.

R. Sulistyowat and D. D. Febriantoro, “Perancangan Prototype Sistem Kontrol dan Monitoring Pembatas Daya Listrik Berbasis Mikrokontroler”., J. IPTEK., Vol 16 No.1 Mei 2012, vol. 16, no. 1, pp. 10–21, 2012.

N. AMARO., “Sistem Monitoring Besaran Listrik dengan Teknologi IoT (Internet of Things)”., Skripsi., Fakultas Teknik Univ. Bandar Lampung, pp. 1–52, 2017.

N. McNeill, H. Dymond, and P. H. Mellor., “High-fidelity Low-Cost Electronic Current Sensor for Utility Power Metering”., IEEE Trans. Power Deliv., vol. 26, no. 4, pp. 2309–2317, 2011.

Z. Pilot and T. Co, “DIN Rail Single Phase Energy Meter Installation & Operation Manual V1. 0 ZHUHAI PILOT TECHNOLOGY CO ., LTD ”., pp. 0–13.




DOI: http://dx.doi.org/10.37209/jtbbt.v10i1.160

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Address:

Center for Material and Technical Product (B4T)

Jl. Sangkuriang No.14, Bandung, 40135, INDONESIA.

Email : jurnal.tbbt@b4t.go.id

Telp : +62-22-2504088

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

View My Stats